Differences

This shows you the differences between two versions of the page.

--- a1:protocol:rpr_rplc_insta_hot [2019/03/19 07:27] – external edit 127.0.0.1
+++ a1:protocol:rpr_rplc_insta_hot [2020/12/24 08:32] (current) – removed davek
@@ Line 1: / Line 1: @@
-======Repair/Replace Insta-Hot======
-====REPAIR=====
-  - IDENTIFY IF UNIT IS PLUGGED IN OR NOT
-  - ENSURE 120V IS PRESENT AT OUTLET
-  - ENGAGE WATER SUPPLY AND CHECK TEMP SETTING
-  - IF UNIT IS SPITTING WHILE ENGAGED, TYPICALLY THERE IS A HOLE IN THE INTERNAL TANK AND IT SHOULD BE REPLACED.
-  - IF LEAKING AT SPOUT, CHECK O-RINGS AT SPOUT CONNECTION.
-====REPLACEMENT====
-  - UNPLUG UNIT/TURN POWER OFF.
-  - TURN OFF WATER SUPPLY TO UNIT
-  - ON SS UNIT, UN CLIP AND DETACH ALL 3 LINES TO TO OF UNIT. THIS CAN VARY ON DIFFERENT INSTA HOT MODELS. I.E; FRANKE, LIL BUTLER ETC.
-  - REMOVE UNIT AND REPLACE WITH SAME UNIT.
-  - ATTACH AND HANG NEW TANK.
-  - ATTACH OLD 3 WATER LINES FROM EXISTING SPOUT TO TANK.
-  - TURN WATER BACK ON AND FILL TANK WITH PURE STREAM COMING OUT OF SPOUT TO CLEAR OUT ANY AIR.
-  - PLUG UNIT IT/TURN ON POWER - THIS IS DONE AFTER FILLING TO PREVENT DRY FIRE OF UNIT.