User Tools

Site Tools


a1:protocol:clr_kit_drn

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
a1:protocol:clr_kit_drn [2019/03/18 16:13]
127.0.0.1 external edit
— (current)
Line 1: Line 1:
-======Protocol for Clearing the Kitchen Drain====== 
- 
-  - IF POSSIBLE THROUGH A CLEAN-OUT AND LEAVING THE DRAIN HOOKED UP GO OUT AND BACK WITH 100 MACHINE WITH THE DROP HEAD.  
-  - IF NO CLEAN-OUT IN PLACE GIVE CLIENT OPTION TO ADD IT SO YOU CAN REINSTALL THE P-TRAP AND RUN SOME WATER WHILE SNAKING TO BE ABLE TO GET THE LINE FULLY CLEAN WHILE THE CABLE IS IN THERE. 1 PASS BACK AND FORTH IS OFTEN GOOD AS LONG AS YOU CAN RUN WATER WHILE SNAKING ​ 
-  - IF NOT 2 PASSES BACK AND FORTH WILL LIKELY BE NECESSARY .  
-  - FINAL TEST FILL SINK COMPLETELY AND THEN DRAIN IT OUT TO BE SURE THE LINE HAS BEEN FULLY CLEARED.  ​ 
- 
-<WRAP center round important 90%> 
-**NOTE IF SNAKING ON A SEPTIC TANK SYSTEM BE CAREFUL AS TO HOW FAR YOU RUN YOUR CABLE OUT, IF ON CITY RUN ENTIRE 75FT OF CABLE OUT AND BACK.** 
-</​WRAP>​ 
-<WRAP center round info 90%> 
-**BIO ONE SHOULD BE OFFERED TO KEEP THE DRAIN CLEAR.** 
-</​WRAP>​ 
  
a1/protocol/clr_kit_drn.1552950829.txt.gz · Last modified: 2019/03/18 16:13 by 127.0.0.1